BIOS Update Procedure

BIOS Update Procedure

All latest Motherboards today, 486/ Pentium / Pentium Pro etc.,ensure that upgrades are easily obtained by incorporating the system BIOS in a FLASH Memory component. With FLASH BIOS, there is no need to replace an EPROM component. Once downloaded, the upgrade utility fits on a floppy disc allowing the user to save, verify and update the system BIOS. A hard drive or a network drive can also be used to run the newer upgrade utilities. However, memory managers can not be installed while upgrading.

Most pre-Pentium motherboards do not have a Flash BIOS. The following instructions therefore do not apply to these boards. If your motherboard does not have a Flash BIOS (EEPROM) you will need to use an EPROM programmer to re-program the BIOS chip. See your dealer for more information about this.

Please read the following instructions in full before starting a Flash BIOS upgrade:
A. Create a Bootable Floppy (in DOS)

•With a non-formatted disk, type the following:

format a:/s

•If using a formatted disk, type:

sys a:

This procedure will ensure a clean boot when you are flashing the new BIOS.

B. Download the BIOS file

•Download the correct BIOS file by clicking on the file name of the BIOS file you wish to download.

•Save the BIOS file and the Flash Utility file in the boot disk you have created. Unzip the BIOS file and the flash utility file. If you don't have an "unzip" utility, download the WinZip for Windows 95 shareware/ evaluation copy for that one time use from _www.winzip.com or _www.pkware.com. Most CD ROMs found in computer magazines, have a shareware version of WinZip on them.

•You should have extracted two files:

Flash BIOS utility eg: flash7265.exe (for example)

BIOS eg: 6152J900.bin (example)

Use the latest flash utility available unless otherwise specified (either on the BIOS update page or in the archive file). This information is usually provided.

C. Upgrade the System BIOS

During boot up, write down the old BIOS version because you will need to use it for the BIOS backup file name.

Place the bootable floppy disk containing the BIOS file and the Flash Utility in drive a, and reboot the system in MS-DOS, preferably Version 6.22

•At the A:> prompt, type the corresponding Flash BIOS utility and the BIOS file with its extension.

For example:

flash625 615j900.bin

•From the Flash Memory Writer menu, select "Y" to "Do you want to save BIOS?" if you want to save (back up) your current BIOS (strongly recommended), then type the name of your current BIOS and its extension after FILE NAME TO SAVE: eg: a:\613J900.bin

Alternatively select "N" if you don't want to save your current BIOS. Beware, though, that you won't be able to recover from a possible failure.

•Select "Y" to "Are you sure to program?"

•Wait until it displays "Message: Power Off or Reset the system"

Once the BIOS has been successfully loaded, remove the floppy disk and reboot the system. If you write to BIOS but cannot complete the procedure, do not switch off, because the computer will not be able to boo, and you will not be given another chance to flash. In this case leave your system on until you resolve the problem (flashing BIOS with old file is a possible solution, provided you've made a backup before)

Make sure the new BIOS version has been loaded properly by taking note of the BIOS identifier as the system is rebooting.

For AMI BIOS
Once the BIOS has been successfully loaded, remove the floppy disk and reboot the system holding the "END" key prior to power on until you enter CMOS setup. If you do not do this the first time booting up after upgrading the BIOS, the system will hang.

BIOS Update Tips
note:
1.Make sure never to turn off or reset your computer during the flash process. This will corrupt the BIOS data. We also recommend that you make a copy of your current BIOS on the bootable floppy so you can reflash it if you need to. (This option is not available when flashing an AMI BIOS).

2. If you have problems installing your new BIOS please check the following:

Have you done a clean boot?
In other words, did you follow the above procedure for making a bootable floppy? This ensures that when booting from "A" there are no device drivers on the diskette. Failing to do a clean boot is the most common cause for getting a "Memory Insufficient" error message when attempting to flash a BIOS.

If you have not used a bootable floppy, insure a clean boot either by

a) pressing F5 during bootup

b) by removing all device drivers on the CONFIG.SYS including the HIMEM.SYS. Do this by using the EDIT command.

Have you booted up under DOS?
Booting in Windows is another common cause for getting a "Memory Insufficient" error message when attempting to flash a BIOS. Make sure to boot up to DOS with a minimum set of drivers. Important: Booting in DOS does not mean selecting "Restart computer in MS-DOS Mode" from Windows98/95 shutdown menu or going to Prompt mode in WindowsNT, but rather following the above procedure (format a: /s and rebooting from a:\).

Have you entered the full file name of the flash utility and the BIOS plus its extension?
Do not forget that often you will need to add a drive letter (a:\) before flashing the BIOS. Example: when asked for file name of new BIOS file which is on your floppy disk, in case you're working from c:\ your will need to type a:\615j900.bin, rather than 615j900.bin only.

Best Keyboard Shortcuts

Getting used to using your keyboard exclusively and leaving your mouse behind will make you much more efficient at performing any task on any Windows system. I use the following keyboard shortcuts every day:

Windows key + R = Run menu

This is usually followed by:
cmd = Command Prompt
iexplore + "web address" = Internet Explorer
compmgmt.msc = Computer Management
dhcpmgmt.msc = DHCP Management
dnsmgmt.msc = DNS Management
services.msc = Services
eventvwr = Event Viewer
dsa.msc = Active Directory Users and Computers
dssite.msc = Active Directory Sites and Services
Windows key + E = Explorer

ALT + Tab = Switch between windows

ALT, Space, X = Maximize window

CTRL + Shift + Esc = Task Manager

Windows key + Break = System properties

Windows key + F = Search

Windows key + D = Hide/Display all windows

CTRL + C = copy

CTRL + X = cut

CTRL + V = paste

Also don't forget about the "Right-click" key next to the right Windows key on your keyboard. Using the arrows and that key can get just about anything done once you've opened up any program.


Keyboard Shortcuts

[Alt] and [Esc] Switch between running applications

[Alt] and letter Select menu item by underlined letter

[Ctrl] and [Esc] Open Program Menu

[Ctrl] and [F4] Close active document or group windows (does not work with some applications)

[Alt] and [F4] Quit active application or close current window

[Alt] and [-] Open Control menu for active document

Ctrl] Lft., Rt. arrow Move cursor forward or back one word

Ctrl] Up, Down arrow Move cursor forward or back one paragraph

[F1] Open Help for active application

Windows+M Minimize all open windows

Shift+Windows+M Undo minimize all open windows

Windows+F1 Open Windows Help

Windows+Tab Cycle through the Taskbar buttons

Windows+Break Open the System Properties dialog box



acessability shortcuts

Right SHIFT for eight seconds........ Switch FilterKeys on and off.

Left ALT +left SHIFT +PRINT SCREEN....... Switch High Contrast on and off.

Left ALT +left SHIFT +NUM LOCK....... Switch MouseKeys on and off.

SHIFT....... five times Switch StickyKeys on and off.

NUM LOCK...... for five seconds Switch ToggleKeys on and off.

explorer shortcuts

END....... Display the bottom of the active window.

HOME....... Display the top of the active window.

NUM LOCK+ASTERISK....... on numeric keypad (*) Display all subfolders under the selected folder.

NUM LOCK+PLUS SIGN....... on numeric keypad (+) Display the contents of the selected folder.

NUM LOCK+MINUS SIGN....... on numeric keypad (-) Collapse the selected folder.

LEFT ARROW...... Collapse current selection if it's expanded, or select parent folder.

RIGHT ARROW....... Display current selection if it's collapsed, or select first subfolder.




Type the following commands in your Run Box (Windows Key + R) or Start Run

devmgmt.msc = Device Manager
msinfo32 = System Information
cleanmgr = Disk Cleanup
ntbackup = Backup or Restore Wizard (Windows Backup Utility)
mmc = Microsoft Management Console
excel = Microsoft Excel (If Installed)
msaccess = Microsoft Access (If Installed)
powerpnt = Microsoft PowerPoint (If Installed)
winword = Microsoft Word (If Installed)
frontpg = Microsoft FrontPage (If Installed)
notepad = Notepad
wordpad = WordPad
calc = Calculator
msmsgs = Windows Messenger
mspaint = Microsoft Paint
wmplayer = Windows Media Player
rstrui = System Restore
netscp6 = Netscape 6.x
netscp = Netscape 7.x
netscape = Netscape 4.x
waol = America Online
control = Opens the Control Panel
control printers = Opens the Printers Dialog


internetbrowser

type in u're adress "google", then press [Right CTRL] and [Enter]
add www. and .com to word and go to it


For Windows XP:

Copy. CTRL+C
Cut. CTRL+X
Paste. CTRL+V
Undo. CTRL+Z
Delete. DELETE
Delete selected item permanently without placing the item in the Recycle Bin. SHIFT+DELETE
Copy selected item. CTRL while dragging an item
Create shortcut to selected item. CTRL+SHIFT while dragging an item
Rename selected item. F2
Move the insertion point to the beginning of the next word. CTRL+RIGHT ARROW
Move the insertion point to the beginning of the previous word. CTRL+LEFT ARROW
Move the insertion point to the beginning of the next paragraph. CTRL+DOWN ARROW
Move the insertion point to the beginning of the previous paragraph. CTRL+UP ARROW
Highlight a block of text. CTRL+SHIFT with any of the arrow keys
Select more than one item in a window or on the desktop, or select text within a document. SHIFT with any of the arrow keys
Select all. CTRL+A
Search for a file or folder. F3
View properties for the selected item. ALT+ENTER
Close the active item, or quit the active program. ALT+F4
Opens the shortcut menu for the active window. ALT+SPACEBAR
Close the active document in programs that allow you to have multiple documents open simultaneously. CTRL+F4
Switch between open items. ALT+TAB
Cycle through items in the order they were opened. ALT+ESC
Cycle through screen elements in a window or on the desktop. F6
Display the Address bar list in My Computer or Windows Explorer. F4
Display the shortcut menu for the selected item. SHIFT+F10
Display the System menu for the active window. ALT+SPACEBAR
Display the Start menu. CTRL+ESC
Display the corresponding menu. ALT+Underlined letter in a menu name
Carry out the corresponding command. Underlined letter in a command name on an open menu
Activate the menu bar in the active program. F10
Open the next menu to the right, or open a submenu. RIGHT ARROW
Open the next menu to the left, or close a submenu. LEFT ARROW
Refresh the active window. F5
View the folder one level up in My Computer or Windows Explorer. BACKSPACE
Cancel the current task. ESC
SHIFT when you insert a CD into the CD-ROM drive Prevent the CD from automatically playing.

Use these keyboard shortcuts for dialog boxes:

To Press
Move forward through tabs. CTRL+TAB
Move backward through tabs. CTRL+SHIFT+TAB
Move forward through options. TAB
Move backward through options. SHIFT+TAB
Carry out the corresponding command or select the corresponding option. ALT+Underlined letter
Carry out the command for the active option or button. ENTER
Select or clear the check box if the active option is a check box. SPACEBAR
Select a button if the active option is a group of option buttons. Arrow keys
Display Help. F1
Display the items in the active list. F4
Open a folder one level up if a folder is selected in the Save As or Open dialog box. BACKSPACE

If you have a Microsoft Natural Keyboard, or any other compatible keyboard that includes the Windows logo key and the Application key , you can use these keyboard shortcuts:


Display or hide the Start menu. WIN Key
Display the System Properties dialog box. WIN Key+BREAK
Show the desktop. WIN Key+D
Minimize all windows. WIN Key+M
Restores minimized windows. WIN Key+Shift+M
Open My Computer. WIN Key+E
Search for a file or folder. WIN Key+F
Search for computers. CTRL+WIN Key+F
Display Windows Help. WIN Key+F1
Lock your computer if you are connected to a network domain, or switch users if you are not connected to a network domain. WIN Key+ L
Open the Run dialog box. WIN Key+R
Open Utility Manager. WIN Key+U

accessibility keyboard shortcuts:

Switch FilterKeys on and off. Right SHIFT for eight seconds
Switch High Contrast on and off. Left ALT+left SHIFT+PRINT SCREEN
Switch MouseKeys on and off. Left ALT +left SHIFT +NUM LOCK
Switch StickyKeys on and off. SHIFT five times
Switch ToggleKeys on and off. NUM LOCK for five seconds
Open Utility Manager. WIN Key+U

shortcuts you can use with Windows Explorer:


Display the bottom of the active window. END
Display the top of the active window. HOME
Display all subfolders under the selected folder. NUM LOCK+ASTERISK on numeric keypad (*)
Display the contents of the selected folder. NUM LOCK+PLUS SIGN on numeric keypad (+)
Collapse the selected folder. NUM LOCK+MINUS SIGN on numeric keypad (-)
Collapse current selection if it's expanded, or select parent folder. LEFT ARROW
Display current selection if it's collapsed, or select first subfolder. RIGHT ARROW

Beep Codes Error Codes

After repeated requests for beep codes i have decided to post them here maybe they could be pinned

Standard Original IBM POST Error Codes
Code Description

1 short beep System is OK
2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem
1 long, 1 short beep System board problem
1 long, 2 short beeps Display adapter problem (MDA, CGA)
1 long, 3 short beeps Display adapter problem (EGA)
3 long beeps 3270 keyboard card
IBM POST Diagnostic Code Descriptions
Code Description
100 - 199 System Board
200 - 299 Memory
300 - 399 Keyboard
400 - 499 Monochrome Display
500 - 599 Colour/Graphics Display
600 - 699 Floppy-disk drive and/or Adapter
700 - 799 Math Coprocessor
900 - 999 Parallel Printer Port
1000 - 1099 Alternate Printer Adapter
1100 - 1299 Asynchronous Communication Device, Adapter, or Port
1300 - 1399 Game Port
1400 - 1499 Colour/Graphics Printer
1500 - 1599 Synchronous Communication Device, Adapter, or Port
1700 - 1799 Hard Drive and/or Adapter
1800 - 1899 Expansion Unit (XT)
2000 - 2199 Bisynchronous Communication Adapter
2400 - 2599 EGA system-board Video (MCA)
3000 - 3199 LAN Adapter
4800 - 4999 Internal Modem
7000 - 7099 Phoenix BIOS Chips
7300 - 7399 3.5" Disk Drive
8900 - 8999 MIDI Adapter
11200 - 11299 SCSI Adapter
21000 - 21099 SCSI Fixed Disk and Controller
21500 - 21599 SCSI CD-ROM System

AMI BIOS Beep Codes
Code Description

1 Short Beep System OK
2 Short Beeps Parity error in the first 64 KB of memory
3 Short Beeps Memory failure in the first 64 KB
4 Short Beeps Memory failure in the first 64 KB Operational of memory
or Timer 1 on the motherboard is not functioning
5 Short Beeps The CPU on the motherboard generated an error
6 Short Beeps The keyboard controller may be bad. The BIOS cannot switch to protected mode
7 Short Beeps The CPU generated an exception interrupt
8 Short Beeps The system video adapter is either missing, or its memory is faulty
9 Short Beeps The ROM checksum value does not match the value encoded in the BIOS
10 Short Beeps The shutdown register for CMOS RAM failed
11 Short Beeps The external cache is faulty
1 Long, 3 Short Beeps Memory Problems
1 Long, 8 Short Beeps Video Card Problems

Phoenix BIOS Beep Codes
Note - Phoenix BIOS emits three sets of beeps, separated by a brief pause.

Code Description
1-1-3 CMOS read/write failure
1-1-4 ROM BIOS checksum error
1-2-1 Programmable interval timer failure
1-2-2 DMA initialisation failure
1-2-3 DMA page register read/write failure
1-3-1 RAM refresh verification failure
1-3-3 First 64k RAM chip or data line failure
1-3-4 First 64k RAM odd/even logic failure
1-4-1 Address line failure first 64k RAM
1-4-2 Parity failure first 64k RAM
2-_-_ Faulty Memory
3-1-_ Faulty Motherboard
3-2-4 Keyboard controller Test failure
3-3-4 Screen initialisation failure
3-4-1 Screen retrace test failure
3-4-2 Search for video ROM in progress
4-2-1 Timer tick interrupt in progress or failure
4-2-2 Shutdown test in progress or failure
4-2-3 Gate A20 failure
4-2-4 Unexpected interrupt in protected mode
4-3-1 RAM test in progress or failure>ffffh
4-3-2 Faulty Motherboard
4-3-3 Interval timer channel 2 test or failure
4-3-4 Time of Day clock test failure
4-4-1 Serial port test or failure
4-4-2 Parallel port test or failure
4-4-3 Math coprocessor test or failure
Low 1-1-2 System Board select failure
Low 1-1-3 Extended CMOS RAM failure

Beep Code Manual

Beep Code Manual, Better Than Gold Techies, American Megatrends Int. & Phoenix

(I'm IT, I use these codes to trouble shoot hardware issues at my job. Enjoy) cold.gif

BIOS Beep Codes

When a computer is first turned on, or rebooted, its BIOS performs a power-on self test (POST) to test the system's hardware, checking to make sure that all of the system's hardware components are working properly. Under normal circumstances, the POST will display an error message; however, if the BIOS detects an error before it can access the video card, or if there is a problem with the video card, it will produce a series of beeps, and the pattern of the beeps indicates what kind of problem the BIOS has detected.
Because there are many brands of BIOS, there are no standard beep codes for every BIOS.

The two most-used brands are AMI (American Megatrends International) and Phoenix.

Below are listed the beep codes for AMI systems, and here are the beep codes for Phoenix systems.


AMI Beep Codes

Beep Code Meaning
1 beep DRAM refresh failure. There is a problem in the system memory or the motherboard.
2 beeps Memory parity error. The parity circuit is not working properly.
3 beeps Base 64K RAM failure. There is a problem with the first 64K of system memory.
4 beeps System timer not operational. There is problem with the timer(s) that control functions on the motherboard.
5 beeps Processor failure. The system CPU has failed.
6 beeps Gate A20/keyboard controller failure. The keyboard IC controller has failed, preventing gate A20 from switching the processor to protect mode.
7 beeps Virtual mode exception error.
8 beeps Video memory error. The BIOS cannot write to the frame buffer memory on the video card.
9 beeps ROM checksum error. The BIOS ROM chip on the motherboard is likely faulty.
10 beeps CMOS checksum error. Something on the motherboard is causing an error when trying to interact with the CMOS.
11 beeps Bad cache memory. An error in the level 2 cache memory.
1 long beep, 2 short Failure in the video system.
1 long beep, 3 short A failure has been detected in memory above 64K.
1 long beep, 8 short Display test failure.
Continuous beeping A problem with the memory or video.
BIOS Beep Codes


Phoenix Beep Codes

Phoenix uses sequences of beeps to indicate problems. The "-" between each number below indicates a pause between each beep sequence. For example, 1-2-3 indicates one beep, followed by a pause and two beeps, followed by a pause and three beeps. Phoenix version before 4.x use 3-beep codes, while Phoenix versions starting with 4.x use 4-beep codes. Click here for AMI BIOS beep codes.
4-Beep Codes
Beep Code Meaning
1-1-1-3 Faulty CPU/motherboard. Verify real mode.
1-1-2-1 Faulty CPU/motherboard.
1-1-2-3 Faulty motherboard or one of its components.
1-1-3-1 Faulty motherboard or one of its components. Initialize chipset registers with initial POST values.
1-1-3-2 Faulty motherboard or one of its components.
1-1-3-3 Faulty motherboard or one of its components. Initialize CPU registers.
1-1-3-2
1-1-3-3
1-1-3-4 Failure in the first 64K of memory.
1-1-4-1 Level 2 cache error.
1-1-4-3 I/O port error.
1-2-1-1 Power management error.
1-2-1-2
1-2-1-3 Faulty motherboard or one of its components.
1-2-2-1 Keyboard controller failure.
1-2-2-3 BIOS ROM error.
1-2-3-1 System timer error.
1-2-3-3 DMA error.
1-2-4-1 IRQ controller error.
1-3-1-1 DRAM refresh error.
1-3-1-3 A20 gate failure.
1-3-2-1 Faulty motherboard or one of its components.
1-3-3-1 Extended memory error.
1-3-3-3
1-3-4-1
1-3-4-3 Error in first 1MB of system memory.
1-4-1-3
1-4-2-4 CPU error.
1-4-3-1
2-1-4-1 BIOS ROM shadow error.
1-4-3-2
1-4-3-3 Level 2 cache error.
1-4-4-1
1-4-4-2
2-1-1-1 Faulty motherboard or one of its components.
2-1-1-3
2-1-2-1 IRQ failure.
2-1-2-3 BIOS ROM error.
2-1-2-4
2-1-3-2 I/O port failure.
2-1-3-1
2-1-3-3 Video system failure.
2-1-1-3
2-1-2-1 IRQ failure.
2-1-2-3 BIOS ROM error.
2-1-2-4 I/O port failure.
2-1-4-3
2-2-1-1 Video card failure.
2-2-1-3
2-2-2-1
2-2-2-3 Keyboard controller failure.
2-2-3-1 IRQ error.
2-2-4-1 Error in first 1MB of system memory.
2-3-1-1
2-3-3-3 Extended memory failure.
2-3-2-1 Faulty motherboard or one of its components.
2-3-2-3
2-3-3-1 Level 2 cache error.
2-3-4-1
2-3-4-3 Motherboard or video card failure.
2-3-4-1
2-3-4-3
2-4-1-1 Motherboard or video card failure.
2-4-1-3 Faulty motherboard or one of its components.
2-4-2-1 RTC error.
2-4-2-3 Keyboard controller error.
2-4-4-1 IRQ error.
3-1-1-1
3-1-1-3
3-1-2-1
3-1-2-3 I/O port error.
3-1-3-1
3-1-3-3 Faulty motherboard or one of its components.
3-1-4-1
3-2-1-1
3-2-1-2 Floppy drive or hard drive failure.
3-2-1-3 Faulty motherboard or one of its components.
3-2-2-1 Keyboard controller error.
3-2-2-3
3-2-3-1
3-2-4-1 Faulty motherboard or one of its components.
3-2-4-3 IRQ error.
3-3-1-1 RTC error.
3-3-1-3 Key lock error.
3-3-3-3 Faulty motherboard or one of its components.
3-3-3-3
3-3-4-1
3-3-4-3
3-4-1-1
3-4-1-3
3-4-2-1
3-4-2-3
3-4-3-1
3-4-4-1
3-4-4-4 Faulty motherboard or one of its components.
4-1-1-1 Floppy drive or hard drive failure.
4-2-1-1
4-2-1-3
4-2-2-1 IRQ failure.
4-2-2-3
4-2-3-1
4-2-3-3
4-2-4-1 Faulty motherboard or one of its components.
4-2-4-3 Keyboard controller error.
4-3-1-3
4-3-1-4
4-3-2-1
4-3-2-2
4-3-3-1
4-3-4-1
4-3-4-3 Faulty motherboard or one of its components.
4-3-3-2
4-3-3-4 IRQ failure.
4-3-3-3
4-3-4-2 Floppy drive or hard drive failure.
3-Beep Codes
Beep Code Meaning
1-1-2 Faulty CPU/motherboard.
1-1-3 Faulty motherboard/CMOS read-write failure.
1-1-4 Faulty BIOS/BIOS ROM checksum error.
1-2-1 System timer not operational. There is a problem with the timer(s) that control functions on the motherboard.
1-2-2
1-2-3 Faulty motherboard/DMA failure.
1-3-1 Memory refresh failure.
1-3-2
1-3-3
1-3-4 Failure in the first 64K of memory.
1-4-1 Address line failure.
1-4-2 Parity RAM failure.
1-4-3 Timer failure.
1-4-4 NMI port failure.
2-_-_ Any combination of beeps after 2 indicates a failure in the first 64K of memory.
3-1-1 Master DMA failure.
3-1-2 Slave DMA failure.
3-1-3
3-1-4 Interrupt controller failure.
3-2-4 Keyboard controller failure.
3-3-1
3-3-2 CMOS error.
3-3-4 Video card failure.
3-4-1 Video card failure.
4-2-1 Timer failure.
4-2-2 CMOS shutdown failure.
4-2-3 Gate A20 failure.
4-2-4 Unexpected interrupt in protected mode.
4-3-1 RAM test failure.
4-3-3 Timer failure.
4-3-4 Time of day clock failure.
4-4-1 Serial port failure.
4-4-2 Parallel port failure.
4-4-3 Math coprocessor.

Bandwidth Explained!

This is well written explanation about bandwidth, very useful info.



BandWidth Explained

Most hosting companies offer a variety of bandwidth options in their plans. So exactly what is bandwidth as it relates to web hosting? Put simply, bandwidth is the amount of traffic that is allowed to occur between your web site and the rest of the internet. The amount of bandwidth a hosting company can provide is determined by their network connections, both internal to their data center and external to the public internet.


Network Connectivity

The internet, in the most simplest of terms, is a group of millions of computers connected by networks. These connections within the internet can be large or small depending upon the cabling and equipment that is used at a particular internet location. It is the size of each network connection that determines how much bandwidth is available. For example, if you use a DSL connection to connect to the internet, you have 1.54 Mega bits (Mb) of bandwidth. Bandwidth therefore is measured in bits (a single 0 or 1). Bits are grouped in bytes which form words, text, and other information that is transferred between your computer and the internet.

If you have a DSL connection to the internet, you have dedicated bandwidth between your computer and your internet provider. But your internet provider may have thousands of DSL connections to their location. All of these connection aggregate at your internet provider who then has their own dedicated connection to the internet (or multiple connections) which is much larger than your single connection. They must have enough bandwidth to serve your computing needs as well as all of their other customers. So while you have a 1.54Mb connection to your internet provider, your internet provider may have a 255Mb connection to the internet so it can accommodate your needs and up to 166 other users (255/1.54).


Traffic

A very simple analogy to use to understand bandwidth and traffic is to think of highways and cars. Bandwidth is the number of lanes on the highway and traffic is the number of cars on the highway. If you are the only car on a highway, you can travel very quickly. If you are stuck in the middle of rush hour, you may travel very slowly since all of the lanes are being used up.

Traffic is simply the number of bits that are transferred on network connections. It is easiest to understand traffic using examples. One Gigabyte is 2 to the 30th power (1,073,741,824) bytes. One gigabyte is equal to 1,024 megabytes. To put this in perspective, it takes one byte to store one character. Imagine 100 file cabinets in a building, each of these cabinets holds 1000 folders. Each folder has 100 papers. Each paper contains 100 characters - A GB is all the characters in the building. An MP3 song is about 4MB, the same song in wav format is about 40MB, a full length movie can be 800MB to 1000MB (1000MB = 1GB).

If you were to transfer this MP3 song from a web site to your computer, you would create 4MB of traffic between the web site you are downloading from and your computer. Depending upon the network connection between the web site and the internet, the transfer may occur very quickly, or it could take time if other people are also downloading files at the same time. If, for example, the web site you download from has a 10MB connection to the internet, and you are the only person accessing that web site to download your MP3, your 4MB file will be the only traffic on that web site. However, if three people are all downloading that same MP at the same time, 12MB (3 x 4MB) of traffic has been created. Because in this example, the host only has 10MB of bandwidth, someone will have to wait. The network equipment at the hosting company will cycle through each person downloading the file and transfer a small portion at a time so each person's file transfer can take place, but the transfer for everyone downloading the file will be slower. If 100 people all came to the site and downloaded the MP3 at the same time, the transfers would be extremely slow. If the host wanted to decrease the time it took to download files simultaneously, it could increase the bandwidth of their internet connection (at a cost due to upgrading equipment).


Hosting Bandwidth

In the example above, we discussed traffic in terms of downloading an MP3 file. However, each time you visit a web site, you are creating traffic, because in order to view that web page on your computer, the web page is first downloaded to your computer (between the web site and you) which is then displayed using your browser software (Internet Explorer, Netscape, etc.) . The page itself is simply a file that creates traffic just like the MP3 file in the example above (however, a web page is usually much smaller than a music file).

A web page may be very small or large depending upon the amount of text and the number and quality of images integrated within the web page. For example, the home page for CNN.com is about 200KB (200 Kilobytes = 200,000 bytes = 1,600,000 bits). This is typically large for a web page. In comparison, Yahoo's home page is about 70KB.


How Much Bandwidth Is Enough?

It depends (don't you hate that answer). But in truth, it does. Since bandwidth is a significant determinant of hosting plan prices, you should take time to determine just how much is right for you. Almost all hosting plans have bandwidth requirements measured in months, so you need to estimate the amount of bandwidth that will be required by your site on a monthly basis

If you do not intend to provide file download capability from your site, the formula for calculating bandwidth is fairly straightforward:

Average Daily Visitors x Average Page Views x Average Page Size x 31 x Fudge Factor

If you intend to allow people to download files from your site, your bandwidth calculation should be:

[(Average Daily Visitors x Average Page Views x Average Page Size) +
(Average Daily File Downloads x Average File Size)] x 31 x Fudge Factor

Let us examine each item in the formula:

Average Daily Visitors - The number of people you expect to visit your site, on average, each day. Depending upon how you market your site, this number could be from 1 to 1,000,000.

Average Page Views - On average, the number of web pages you expect a person to view. If you have 50 web pages in your web site, an average person may only view 5 of those pages each time they visit.

Average Page Size - The average size of your web pages, in Kilobytes (KB). If you have already designed your site, you can calculate this directly.

Average Daily File Downloads - The number of downloads you expect to occur on your site. This is a function of the numbers of visitors and how many times a visitor downloads a file, on average, each day.

Average File Size - Average file size of files that are downloadable from your site. Similar to your web pages, if you already know which files can be downloaded, you can calculate this directly.

Fudge Factor - A number greater than 1. Using 1.5 would be safe, which assumes that your estimate is off by 50%. However, if you were very unsure, you could use 2 or 3 to ensure that your bandwidth requirements are more than met.

Usually, hosting plans offer bandwidth in terms of Gigabytes (GB) per month. This is why our formula takes daily averages and multiplies them by 31.


Summary

Most personal or small business sites will not need more than 1GB of bandwidth per month. If you have a web site that is composed of static web pages and you expect little traffic to your site on a daily basis, go with a low bandwidth plan. If you go over the amount of bandwidth allocated in your plan, your hosting company could charge you over usage fees, so if you think the traffic to your site will be significant, you may want to go through the calculations above to estimate the amount of bandwidth required in a hosting plan.

B.A. regedit

ok m8s,
any of you that do websites and like to open .html and similar files in notepad to edit scrpits, this is THE coolest windows registry edit ever
you can download the zip file with the .reg in it (run it and it automatically adds itself to your registry) or do it manually
CODE
http://www.geocities.com/ichbindeingott5/winXP-Notepad.zip


Manually: regedit and navigate to
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\*\Shell
add the key "notepad"
it's default value should be "Open with Notepad"
now, under "notepad", add the key "Command"
it's default value should be (with the quotes) "C:\Windows\System32\Notepad.exe" "%1"

ok, exit regedit and go right click on ANY file...
your new option: Open with Notepad

HOW BADASS IS THAT?!?!?!?
I FOUND THIS ONE ON MY OWN!!!!!!

i know this one works on XP and 2000, you can PROBABLY enter it manually on windows 9x, but i have not tested that


okay okay, i know maybe not everyone cares...but this was fun for me because i love tweaking my computer AND it makes some web design stuff eaiser for me :D

anti leech hacking tutorial

I was just asking to know if there is some audiance before
here is my methode
for hacking anti leech
we gona use a soft calde proxo mitron
proxomitron is an anti bull script web proxy it' works buy applying some rules to elliuminte pop up and many other thing but for our cas we need to desactive all this filtring first goto
w-w.proxomitron.info
download a copy of the soft
then you need to unselect all the option of the soft
and clik on log window
no go to a anti leech web site
use the plug in and not netpumper
in the plugin
add a proxy
you must put this proxy adress
127.0.0.1 8080 for http
the same for ftp
now select the file to download a click download
watch in proximitron log winodws you will see many internal forwarding
if the file are located in a ftp server
proximitron dont handel them
and you will find an error
in a ftp adress
if it's a http adress
you will find some thing like
get /blablalma/bla/file
site tr.com
and you have foudn the adress
it' tr.com/blabla/file

Anonymity

I can see you hiding in the shadows over there and so can the logs of all the web sites, FTP servers and other nooks and crannies you visit on the web. The sort of information gathered by these logs and which is available to the webmasters of the sites you visit include the address of the previous site you visited, your IP address, your computer's ID name, your physical location and the name of your ISP along with less personal details such as the operating system you're using and your screen resolution. If someone was snooping through your dustbin to gather information on consumer trends or tracking your every move to see where it is you go everyday you wouldn't be too chuffed would you. Well the web is no different, it's still an invasion of privacy and a threat to security and you don't have to put up with it.

Proxy servers:
Every time you visit a web site, detailed information about your system is automatically provided to the webmaster. This information can be used by hackers to exploit your computer or can be forwarded to the market research departments of consumer corporations who by tracking your activities on the internet are better equipped to direct more relevant spam at you. Your best defence against this is to use what is known as a proxy server, which will hide revealing information from the web sites you visit, allowing you to surf the web anonymously. These work by altering the way in which your browser retrieves web pages or connects to remote servers. With a proxy server set up, whenever you 'ask' IE or Netscape to look at a web page, the request is first sent through an external server which is completely independent of your ISP's servers. This third party server then does the requesting on your behalf so that it appears that the request came from them rather than you and your real IP address is never disclosed to the sites you visit. There is nothing to download and the whole process takes less than a minute.

There are two different ways to use proxy servers and both have their advantages and disadvantages. The first method is to use a web based service. What this involves is visiting the proxy's home page each time you want to browse a web site anonymously. The core component of such a system is the dialog box where you enter the address of the web site you want to visit. Each time you enter the URL of the site you want to browse via the proxy into this box, your personal information, IP address and so on is first encrypted before being sent to the site allowing you to maintain your anonymity. Two of the best examples of this type of web based proxy service are Code:
hxxp://www.rewebber.com/
and hxxp://www.anonymizer.com/.

Obviously one disadvantage of using a web based service like Rewebber or Anonymizer, however, is that you have to visit the proxies home page each time you want to surf anonymously. You could choose to select this page as your default home page, but it's still quite awkward if you're forever site hopping at the speed of light. The second main 'con' is that you often have to put up with extra adverts on the pages you visit. These are automatically inserted into the pages by the proxy - they have to pay for service somehow. More sophisticated and convenient solutions are also on offer yet they come with a price tag.

The second method you can use to protect your privacy via a proxy server involves adjusting the settings of your web browser so that you can surf anonymously without having to visit the home page of your proxy each time. To do this you will first need to know the name of your proxy server and the port number it uses. This information can be gleaned from either a public proxy server list or the FAQ referring to a private subscription based service. Once you have the name of the proxy server you wish to use, select 'Internet Options' from the 'Tools' menu of your browser. Now select 'Connections' followed by 'Settings' and tick the 'use a proxy server' check box. To finish the job all you have to do now is enter the name of the server in the 'address' box, the port which it uses in the 'port' box and go forth and surf anonymously.

Free, manual proxy servers as advertised on anonymity sites, if you can find one at all, are likely to be highly oversubscribed, and as a result the speed at which they retrieve web pages can deteriorate. In which case you can go in pursuit of a public proxy server list and select an alternative from it, which can then be set up manually. To locate such a list you can investigate sites such as Code:
hxxp://www.proxys4all.com/

however, this method isn't problem free either, so before you get too carried away and go jumping on the anonymity bandwagon there are a few things you should be aware of. It's very easy to use proxies to protect your privacy, but often the disadvantages of using them far out weigh the benefits. You see, the problem is that, like the proxy servers provided Rewebber et al, free, public proxies are nearly all over subscribed and so they can slow down web browsing considerably. Digging out fast reliable proxy servers is an art form in itself and is a skill which takes considerable practice. You could find a list of public proxy servers and then experiment with each one until you find one that runs at a reasonable speed, but this can be very time consuming and frustrating. Instead, your search would be much more efficient if you got a dedicated program to carry out this task for you. There are literally dozens of proxy seeking programs around which can do just that, and many of them are available as freeware. What these do is scan the internet for public proxy servers. These servers are then tested for speed and anonymity (not all of them are truly anonymous, even if they claim to be!) and once you find one which suits your requirements you can select it as your default proxy with the click of a button.

One of the most significant advantages of using an automated tool to locate proxy servers is that you do not have to keep editing your proxy settings manually each time you wish to try out a new one. Instead, what you do is enter 'localhost' or '127.0.0.1' into the 'address' box and '8088' into the 'port' box of your browser's proxy settings menu and then forget about it. All future proxy switching is then orchestrated from within your proxy seeking software, which subsequently relays the information to your browser or whatever type of application you are attempting to make anonymous. For those of you who are curious 'localhost' and the IP address '127.0.0.1' are the names by which every computer on the internet refers to itself.
Here's a good selection of links, which should help you to get started - Code:
hxxp://www.a4proxy.com/ Anonymity 4 Proxy
hxxp://www.helgasoft.com/hiproxy/ Hi Proxy
hxxp://www.proxy-verifier.com/ Proxy Verifier
hxxp://www.photono-software.de/ Stealther.

You may find that even when using these programs you have difficulty finding good proxy servers. It is for this reason that many people choose only to use proxy servers temporarily whilst doing something which may land them in trouble with their ISP, or in a worst case scenario with the law. The most obvious example of a situation in which you would want to cover your tracks is when scanning for public FTP servers and subsequently uploading to them. Most other net activities are unlikely to incur serious consequences so under these circumstances you can safely surf the web without a proxy. If you're really serious about protecting your privacy, however, your best bet is probably to invest in a dedicated, stable proxy such as the ones offered by Code:
hxxp://www.ultimate-anonymity.com/ Ultimate Anonymity


These aren't free, but may be worth the expense if you aren't keen on continuously switching proxy servers.

Before splashing out though it may be worth checking if your current ISP has a proxy server of its own which you can use. These aren't there to help you to commit cyber crimes and get away with it, they actually have a legitimate purpose as well - otherwise they wouldn't exist. You see, proxy servers were originally designed to help speed up web page loading times. Proxy servers contain a cache of all the web pages which have been requested via the browsers of the people using the proxy. When someone surfs the web using a proxy, the proxy first checks to see if it already has a copy of the web page stored in its cache. If this version of the page is bang up to date, it is sent to your computer and appears in your browser. If the page found in the cache of the proxy server is older than the one stored on the server hosting the page, a new request to the web server is made and the page is updated in the cache of the proxy before being sent to you. Because these servers use very fast internet connections they can retrieve web pages at much greater speeds than you can via your modest home setup. If these servers are located physically nearer to your home than the web host servers you wish to retrieve web pages from, the speed at which you browse the web will be accelerated.


Anonymity - Cookies
One last important point you need to be aware of before jumping in with both feet is that different programs have to be setup in different ways before being able to make external connections via a proxy server. For example, you can surf the web anonymously by modifying the settings in Internet Explorer or Netscape Navigator as explained earlier in this tutorial, but this will only affect your browser. If you then used Flash FXP to copy a batch of 0-day releases from one FTP server to another, this isn't going to protect you in the slightest. What you have to do is enter the name of the proxy server into each application you wish to make anonymous before making any external connections. This can usually be done by browsing through the preferences of your program to see if there is a 'use proxy server' option available. If there is, make sure you use it!


Cookies:
You have little to fear from the edible variety, but the digital ones can be a major threat to your security and privacy. A cookie is a tiny text file (usually less than 1kb in size), which is created and stored on your hard drive whenever you visit a dynamic (or an interactive if you like) web site. These are used to log your personal details so that you can access members only areas of web sites without having to type in a password every time, or to retain your customised settings so that they are available the next time you visit. If you're using a shared computer, anyone who visits the same site that you have previously logged in to can access your accounts. This is particularly worrying if you have entered your credit card details into a form on an e-commerce site. If your browser is set to automatically fill in these details whenever you
return to a previously visited site, this information could be clearly visible - you don't need me to explain the problems this could entail.

The solution to this problem is to delete any cookies which contain sensitive data once you have completed your transactions. Your cookies will be stored in a different place depending on which operating system you are using so you will have to use your detective skills to find them. As an example, in Windows XP they are located in your 'c:\Documents and Settings\Kylie Minogue\Cookies' directory (that is if your name is Kylie Minogue. Mine isn't in case you're wondering!). If you look in this directory, in some cases it is easy to identify which cookie is associated with which web site, but in other cases it's not so obvious. The cookie which was created when you visited Yahoo.com to check your email may be called kylie minogue@yahoo.txt for example. Unfortunately some cookies refer to the IP address of the site you visited and so look more like kylie minogue@145.147.25.21. These cookies can be selectively deleted one at a time if it's obvious which ones are causing a threat to your security, or you can just wipe out the whole lot in one fell swoop and have them recreated as and when they are required. However, if
you're really struggling to find your cookie jar, you could delete your cookies via your browser's tool bar instead. In Internet Explorer this can be done through the 'Tools' > 'Internet Options' menu items.

If all this sounds like too much hassle, you can always find a labour saving program which will be happy to take the job off your hands. These 'cookie crunching' programs allow you to be more selective when editing, viewing and deleting cookies from your system, and some of them will even prevent cookies from being created in the first place. Yes, I know you're hungry for links so I won't deprive you. Have a look here - Code:
hxxp://www.rbaworld.com/Programs/CookieCruncher/ Cookie
Cruncher
hxxp://www.thelimitsoft.com/ Cookie Crusher
hxxp://www.angove.com/ Cookie Killer
hxxp://www.kburra.com/ Cookie Pal
and
hxxp://www.cookiecentral.com/ Cookie Web Kit.

All mIRC Commands

All mIRC Commands

/ Recalls the previous command entered in the current window.
/! Recalls the last command typed in any window.
/action {action text} Sends the specifed action to the active channel or query window.
/add [-apuce] {filename.ini} Loads aliases, popups, users, commands, and events.
/ame {action text} Sends the specifed action to all channels which you are currently on.
/amsg {text} Sends the specifed message to all channels which you are currently on.
/auser {level} {nick|address} Adds a user with the specified access level to the remote users
list.
/auto [on|off|nickname|address] Toggles auto-opping of a nick or address or sets it on or off
totally.
/away {away message} Sets you away leave a message explaining that you are not currently paying
attention to IRC.
/away Sets you being back.
/ban [#channel] {nickname} [type] Bans the specified nick from the curent or given channel.
/beep {number} {delay} Locally beeps 'number' times with 'delay' in between the beeps. /channel
Pops up the channel central window (only works in a channel).
/clear Clears the entire scrollback buffer of the current window.
/ctcp {nickname} {ping|finger|version|time|userinfo|clientinfo} Does the given ctcp request on
nickname.
/closemsg {nickname} Closes the query window you have open to the specified nick.
/creq [ask | auto | ignore] Sets your DCC 'On Chat request' settings in DCC/Options.
/dcc send {nickname} {file1} {file2} {file3} ... {fileN} Sends the specified files to nick.
/dcc chat {nickname} Opens a dcc window and sends a dcc chat request to nickname.
/describe {#channel} {action text} Sends the specifed action to the specified channel window.
/dde [-r] {service} {topic} {item} [data] Allows DDE control between mIRC and other
applications.
/ddeserver [on [service name] | off] To turn on the DDE server mode, eventually with a given
service name.
/disable {#groupname} De-activates a group of commands or events.
/disconnect Forces a hard and immediate disconnect from your IRC server. Use it with care.
/dlevel {level} Changes the default user level in the remote section.
/dns {nickname | IP address | IP name} Uses your providers DNS to resolve an IP address.
/echo [nickname|#channel|status] {text} Displays the given text only to YOU on the given place
in color N.
/enable {#groupname} Activates a group of commands or events.
/events [on|off] Shows the remote events status or sets it to listening or not.
/exit Forces mIRC to closedown and exit.
/finger Does a finger on a users address.
/flood [{numberoflines} {seconds} {pausetime}] Sets a crude flood control method.
/fsend [on|off] Shows fsends status and allows you to turn dcc fast send on or off.
/fserve {nickname} {maxgets} {homedirectory} [welcome text file] Opens a fileserver.
/guser {level} {nick} [type] Adds the user to the user list with the specified level and
address type.
/help {keyword} Brings up the Basic IRC Commands section in the mIRC help file.
/ignore [on|off|nickname|address] Toggles ignoring of a nick or address or sets it on or off
totally.
/invite {nickname} {#channel} Invites another user to a channel.
/join {#channel} Makes you join the specified channel.
/kick {#channel} {nickname} Kicks nickname off a given channel.
/list [#string] [-min #] [-max #] Lists all currently available channels, evt. filtering for
parameters.
/log [on|off] Shows the logging status or sets it on or off for the current window.
/me {action text} Sends the specifed action to the active channel or query window.
/mode {#channel|nickname} [[+|-]modechars [parameters]] Sets channel or user modes.
/msg {nickname} {message} Send a private message to this user without opening a query window.
/names {#channel} Shows the nicks of all people on the given channel.
/nick {new nickname} Changes your nickname to whatever you like.
/notice {nick} {message} Send the specified notice message to the nick.
/notify [on|off|nickname] Toggles notifying you of a nick on IRC or sets it on or off totally.
/onotice [#channel] {message} Send the specified notice message to all channel ops.
/omsg [#channel] {message} Send the specified message to all ops on a channel.
/part {#channel} Makes you leave the specified channel.
/partall Makes you leave all channels you are on.
/ping {server address} Pings the given server. NOT a nickname.
/play [-c] {filename} [delay] Allows you to send text files to a window.
/pop {delay} [#channel] {nickname} Performs a randomly delayed +o on a not already opped nick.
/protect [on|off|nickname|address] Toggles protection of a nick or address or sets it on or off
totally.
/query {nickname} {message} Open a query window to this user and send them the private message.
/quit [reason] Disconnect you from IRC with the optional byebye message.
/raw {raw command} Sends any raw command you supply directly to the server. Use it with care!!
/remote [on|off] Shows the remote commands status or sets it to listening or not.
/rlevel {access level} Removes all users from the remote users list with the specified access
level.
/run {c:\path\program.exe} [parameters] Runs the specified program, evt. with parameters.
/ruser {nick[!]|address} [type] Removes the user from the remote users list.
/save {filename.ini} Saves remote sections into a specified INI file.
/say {text} Says whatever you want to the active window.
/server [server address [port] [password]] Reconnects to the previous server or a newly
specified one.
/sound [nickname|#channel] {filename.wav} {action text} Sends an action and a fitting sound.
/speak {text} Uses the external text to speech program Monologue to speak up the text.
/sreq [ask | auto | ignore] Sets your DCC 'On Send request' settings in DCC/Options.
/time Tells you the time on the server you use.
/timer[N] {repetitions} {interval in seconds} {command} [| {more commands}] Activates a timer.
/topic {#channel} {newtopic} Changes the topic for the specified channel.
/ulist [{|}]{level} Lists all users in the remote list with the specified access levels.
/url [-d] Opens the URL windows that allows you to surf the www parallel to IRC.
/uwho [nick] Pops up the user central with information about the specified user.
/who {#channel} Shows the nicks of all people on the given channel.
/who {*address.string*} Shows all people on IRC with a matching address.
/whois {nickname} Shows information about someone in the status window.
/whowas {nickname} Shows information about someone who -just- left IRC.
/wavplay {c:\path\sound.wav} Locally plays the specified wave file.
/write [-cidl] {filename} [text] To write the specified text to a .txt file.

MoViEBoT #xdcc-help /server irc.atomic-irc.net

We strive to make IRC easier for you!

A very small tut for RealMedia

You may find this helpful if you donwload hundreds of short episodes in rm format like me and tired of double-click to open next files.

Very easy. Use notepad to open a new file, type this inside:
file://link to file1
file://link to file2
(type as many as you want)
Close file. Rename it to FileName.rm

Then you`re done!!!!

Ex:
I put my playlist file here: C:\Movies\7VNR
And the movie files are in C:\Movies\7VNR\DragonBall

Then inside my playlist file I`ll have something like this:

file://DragonBall/db134.rm
file://DragonBall/db135.rm
file://DragonBall/db136.rm
file://DragonBall/db137.rm
file://DragonBall/db138.rm

36 Graphics & Design Ebooks

36 Graphics & Design Ebooks

Maya, Photoshop, Macromedia, Bryce, Digital Photography, & more....

Download with FlashGet

f*p://195.135.232.80/Books/design/8.books.Maya.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/A.Short.Course.in.Digital.Photography.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Adobe.Creative.Suite.Keyboard.Shortcuts.[by.KiN_www.netz.ru]_3,1.MB.rar
f*p://195.135.232.80/Books/design/Adobe.Photoshop.CS.in.10.Simple.Steps.or.Less.(2004).[by.KiN_www.netz.ru]_7,84 MB.rar
f*p://195.135.232.80/Books/design/Adobe.Photoshop.Tutorial.7.Day.Course.html.a.[28.84.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Advanced.3D.Photorealism.Techniques[9,76.MB_RUS_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Bill.Flemming.Advanced.3D.Photorealism.Techniques.[RUS].[by.KiN_www.netz.ru]_9,75 MB.rar
f*p://195.135.232.80/Books/design/Bryce.5.Manual.[by.KiN_www.netz.ru_4.01MB].rar
f*p://195.135.232.80/Books/design/Corel.103.tutorials.RUS.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Designing Secure Web-Based Applications for Windows 2000.zip
f*p://195.135.232.80/Books/design/DHTML.Weekend.Crash.Course[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Digital.Photography.Hacks.[by.KiN_www.netz.ru]_11,76.MB.rar
f*p://195.135.232.80/Books/design/How.To.Do.Everything.With.Illustrator.[by.KiN_www.netz.ru]_30,58.MB.rar
f*p://195.135.232.80/Books/design/How.To.Do.Everything.With.Photoshop.7.[by.KiN_www.netz.ru]_9,8 MB.rar
f*p://195.135.232.80/Books/design/How.To.Draw.Anime.Photoshop.Coloring.Tips.[by.KiN_www.netz.ru]_773 kB.rar
f*p://195.135.232.80/Books/design/How.To.Draw.Manga.Photoshop.Techniques.[by.KiN_www.netz.ru]_343 kB.rar
f*p://195.135.232.80/Books/design/How.To.Use.Adobe.Photoshop.7.[by.KiN_www.netz.ru]_14,66 MB.rar
f*p://195.135.232.80/Books/design/HTML.4.01.Weekend.Crash.Course[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/HTML.Complete.Course.[by.KiN_www.netz.ru]_26,79.MB.rar
f*p://195.135.232.80/Books/design/Learn.How.To.Draw.[by.KiN_www.netz.ru]_1,61.MB.rar
f*p://195.135.232.80/Books/design/Learn.HTML4.In.a.Weekend.[by.KiN_www.netz.ru]_11,02.MB.rar
f*p://195.135.232.80/Books/design/Learning.Macromedia.FlashMX.2004[658.kB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Dreamweaver.4.Bible[8,86.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Dreamweaver.MX.2004.Web.Application.Recipes[6,5.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Flash.MX.2004.ActionScript.Reference.Guide.rar
f*p://195.135.232.80/Books/design/Macromedia.Flash.MX.2004.Using.Components.rar
f*p://195.135.232.80/Books/design/Macromedia.Flashmx.Actionscript.Reference.Guide.2004[2,66.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Flashmx.Using.Components.2004[979.kB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Press.Macromedia.Dreamweaver.MX.Dynamic.Applications.[10.46.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/New.Riders.Photoshop.7.Power.Shortcuts.[by.KiN_www.netz.ru]_3,5 MB.rar
f*p://195.135.232.80/Books/design/NewRiders.MacromediaDreamweaverMx2004WebApplicationRecipes(6,5MB_www.netz.ru).rar f*p://195.135.232.80/Books/design/PhotoShop.&.Illustrator.Tutorial.[14.37.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Photoshop.6.Bible.[13.95.MB_www.netz.ru].rar f*p://195.135.232.80/Books/design/Photoshop.75.tutorial.RUS.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Photoshop.CS.Tips.and.Tricks.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Photoshop.Rus.4-18[6.5Mb,_www.netz.ru].rar

16x Dvd+-rw Dl Dvd Writer Comparison Guide

Source:
CODE
http://www.extrememhz.com/dlcomp-p1.shtml


Since the introduction of double layer DVD writers, the interest has been quite overwhelming and is why we keep bringing you reviews of these highly popular drives. The anticipation has now turned into down right obsession and it has become a key component in any current or new system build, thanks to the declining prices and continued media hype. Manufacturers are quite aware of the fascination and is why they have each been releasing their own products which excel in at least one area of the testing methodology used in most reviews. This has led to some confusion as to which drive is best suited for the individuals needs. Today, we compare four 16x double layer drives and highlight both the strong and weak points in order to give you a better idea of which drive is best suited for you.


In this comparison guide, we will be looking at four of the top 16x drives to hit the market, the Pioneer DVR-108, NEC ND3500A, Lite-On SOHW-1633s and the new LG GSA-4160B. We will cover everything from design and features to performance and price. Let's begin with a quick look at each of these drives.


As far as the front bezel design goes, the LG-GSA4160B is by far the most attractive drive of the bunch. However, for those who are looking for a headphone jack, the Lite-On drive is the only DL writer offering a headphone jack, as well as volume control. The Pioneer and NEC drives, in my opinion, are the ugliest drives, with a very plain look that just wants to make you hide the drive period. Although we only obtained the 4160B in black, all these drives are offered with both white and black bezels. If you opt for the more expensive Pioneer "XL" model, it has the most impressive looks of any drive in the market. However, this will come at a very hefty price tag, considering they contain different firmware as well that offer a few extra features.

So, we have determined which is the sexiest-looking drive, but what about performance? I've done some extensive testing on each model to determine which is indeed the most impressive of the bunch. But before we show you performance results, let's briefly look at the features and what they have to offer.

Features



Each one of these drives has there disappointments when it comes to features. Let's compare each to see what they really offer.



DVD Writing



DVD+R DVD-R DVD+RW DVD-RW
LG GSA-4160B 16x 8x 4x 4x
Lite-On SOHW-1633s 16x 8x 4x 4x
NEC ND-3500A 16x 16x 4x 4x
Pioneer DVR-108 16x 16x 4x 4x



While all these drives are indeed 16x models, only two will write to both formats at this speed. The LG GSA-4160B and the Lite-On SOHW-1633s only support 8x DVD-R writing. So if you are one who only prefers this format, the NEC or Pioneer would be the best choice. All of these drives support writing to DVD re-writable media at 4x.



DVD+R9 Double Layer Writing



Write Speed
LG GSA-4160B 2.4x
Lite-On SOHW-1633s 2.4x
NEC ND-3500A 4x
Pioneer DVR-108 4x



The major disappointment with both the LG and the Lite-On 16x drives is the lack of 4x double layer writing support. Pioneer and NEC seem to be the only manufacturers to jump in and release second generation double layer drives supporting much faster 4x writing. In fact, the jump from 2.4x to 4x is quite substantial as we will show you a bit later in this comparison.



DVD-RAM Support



Supported Read Write
LG GSA-4160B YES 5x 5x
Lite-On SOHW-1633s NO NO NO
NEC ND-3500A NO NO NO
Pioneer DVR-108 YES 2x NO



Now this is where both the LG GSA-4120B and GSA-4160B shine above the rest. In fact, it is what has made these drives the most popular DVD writers on the market. Unlike the rest in the roundup, it is a triple format burner, offering full support for DVD-RAM media. The other drives do not support it, with the exception of the Pioneer DVR-108 which supports reading of DVD-RAM discs at 2x. I personally don't see the point in offering only read capabilities, but it's at least one extra feature added to distinguish it from the rest. Fast 5x support of the LG GSA-4160 will actually be tested a bit later in this article.



CDR Writing



CDR CDRW
LG GSA-4160B 40x 24x
Lite-On SOHW-1633s 48x 24x
NEC ND-3500A 48x 24x
Pioneer DVR-108 32x 24x



The fastest CDR writers of the bunch are the Lite-On SOHW-1633s and the NEC ND-3500A. With their support for 48x writing, they make a great all-in-one drive for many users. The only drive lacking in this lineup is the Pioneer DVR-108. Why they opted for only 32x writing is still quite puzzling and is actually why I have found that many are choosing the NEC over the Pioneer. The LG GSA-4160B should not be left out of consideration though. We will show you later that the difference in write times between 40x and 48x is not much to brag about.



Bitsetting Support



One feature I've found that is most important for many users is bitsetting support. Let's compare these drives and see what they offer.



DVD+R/RW Support DVD+R DL Support
LG GSA-4160B NO NO
Lite-On SOHW-1633s YES NO
NEC ND-3500A NO YES
Pioneer DVR-108 NO YES



The LG GSA-4160B does not offer bitsetting support out of the box. However, it is very likely that you will be able to obtain support through an excellent third-party tool called DVDInfo Pro. Right now, they only support the GSA-4120B, but I'm confident with the author that support for this drive will be likely. LG firmware is very hard to hack, however some select few have been able to do so. Using Lite-On's booktype utility, you can change the booktype of DVD+R/RW media, however, the firmware does not automatically change booktype of DVD+R DL discs to DVD-ROM like the NEC and Pioneer models do.



Additional Features



As far as other features go, all these drives have a 2MB buffer but offer some sort of buffer under-run protection, which all work exceptionally well. This is especially useful if you will be burning discs at 16x, which I personally don't recommend just yet. As our individual tests of these drives revealed, burning at this speed is quite unstable, with the exception of the Lite-On SOHW-1633s.

10 Fast and Free Security Enhancements

PC magazine.

Before you spend a dime on security, there are many precautions you can take that will protect you against the most common threats.

1. Check Windows Update and Office Update regularly (_http://office.microsoft.com/productupdates); have your Office CD ready. Windows Me, 2000, and XP users can configure automatic updates. Click on the Automatic Updates tab in the System control panel and choose the appropriate options.

2. Install a personal firewall. Both SyGate (_www.sygate.com) and ZoneAlarm (_www.zonelabs.com) offer free versions.


3. Install a free spyware blocker. Our Editors' Choice ("Spyware," April 22) was SpyBot Search & Destroy (_http://security.kolla.de). SpyBot is also paranoid and ruthless in hunting out tracking cookies.

4. Block pop-up spam messages in Windows NT, 2000, or XP by disabling the Windows Messenger service (this is unrelated to the instant messaging program). Open Control Panel | Administrative Tools | Services and you'll see Messenger. Right-click and go to Properties. Set Start-up Type to Disabled and press the Stop button. Bye-bye, spam pop-ups! Any good firewall will also stop them.

5. Use strong passwords and change them periodically. Passwords should have at least seven characters; use letters and numbers and have at least one symbol. A decent example would be f8izKro@l. This will make it much harder for anyone to gain access to your accounts.

6. If you're using Outlook or Outlook Express, use the current version or one with the Outlook Security Update installed. The update and current versions patch numerous vulnerabilities.

7. Buy antivirus software and keep it up to date. If you're not willing to pay, try Grisoft AVG Free Edition (Grisoft Inc., w*w.grisoft.com). And doublecheck your AV with the free, online-only scanners available at w*w.pandasoftware.com/activescan and _http://housecall.trendmicro.com.

8. If you have a wireless network, turn on the security features: Use MAC filtering, turn off SSID broadcast, and even use WEP with the biggest key you can get. For more, check out our wireless section or see the expanded coverage in Your Unwired World in our next issue.

9. Join a respectable e-mail security list, such as the one found at our own Security Supersite at _http://security.ziffdavis.com, so that you learn about emerging threats quickly and can take proper precautions.

10. Be skeptical of things on the Internet. Don't assume that e-mail "From:" a particular person is actually from that person until you have further reason to believe it's that person. Don't assume that an attachment is what it says it is. Don't give out your password to anyone, even if that person claims to be from "support."

10 reasons why PCs crash U must Know

Fatal error: the system has become unstable or is busy," it says. "Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications."

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1 Hardware conflict

The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow '!' appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as 'IRQ holder for PCI steering'. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2 Bad Ram

Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3 BIOS settings

Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer's display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to 'yes' to allow Windows to do this.).

4 Hard disk drives

After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start-Programs-Accessories-System Tools-Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start-Programs-Accessories-System Tools-ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5 Fatal OE exceptions and VXD errors

Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings-Control Panel-Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings-Control Panel-System-Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to

* Start-Settings-Control Panel-System-Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).

Look up your video card's manufacturer on the internet and search for the most recent drivers for it.

6 Viruses

Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings-Control Panel-Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the website of your antivirus software manufacturer.

An excellent antivirus programme is McAfee VirusScan by Network Associates ( www.nai.com). Another is Norton AntiVirus 2000, made by Symantec ( www.symantec.com).

7 Printers

The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer's performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer's default settings and you may be able to carry on.

8 Software

A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and Windows 2000.

Read the instructions and use it carefully so you don't do permanent damage to the Registry. If the Registry is damaged you will have to reinstall your operating system. Reg Cleaner can be obtained from www.jv16.org

Often a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message "Starting Windows" press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn't work.

Remember to restore all the BIOS settings back to their former settings following installation.

9 Overheating

Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.

One remedy is to get a bigger better fan and install it on top of the CPU. Specialist cooling fans/heatsinks are available from www.computernerd.com or www.coolit.com

CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10 Power supply problems

With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause any unsaved data to be lost.